Editing Forums/Z31P/z31-performance-upgrade-forums cosmetic-interior-exterior/Body/Door Trim Removal

{{ForumImport
|op_user=adroitcaptor
|op_date=2014-02-04 00:17:43
|post_count=5
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/cosmetic-interior-exterior/23293-body-door-trim-removal.html
}}

'''adroitcaptor:''' <small>(2014-02-04 00:17:43)</small>

So is there a way too get this sticky/foam/silicone crap off or a better way to take the trim off? I tried dental floss, a paint scraper, and a body scraper thing after searching and the below is the result (not much difference). FWIW I could care less about the paint as I will eventually repaint it. I do care about the body. http://i270.photobucket.com/albums/j…203_150604.jpg

----
'''FlyingT:''' <small>(2014-02-04 01:57:43)</small>

{{Quote|user=|}}

Get 3M sticky tape adhesive remover.

[http://www.3m.com/product/information/Scotch-Brite-Molding-Adhesive-Stripe-Removal-Disc.html http://www.3m.com/product/informatio…oval-Disc.html]

----
'''adroitcaptor:''' <small>(2014-02-04 02:59:33)</small>

Will that take off that capt foam and the silicone? (The Black silicone strip in the middle, is on there like a white stripe on a skunk.)

----
'''Z_Karma:''' <small>(2014-02-04 19:49:53)</small>

When i removed mine, i used goo-gone and a razorblade(s).

Then i discovered the existence of this:

[http://www.autogeek.net/3m-stripe-off-wheel-07498.html http://www.autogeek.net/3m-stripe-off-wheel-07498.html]

and it worked beautifully, like a pencil eraser on steroids.

I wish i had discovered it before i fucked up my clearcoat with the razorblades.

----
'''utjon:''' <small>(2014-02-14 04:01:49)</small>

I used a heat gun to take the trim off but the remaining stuff was totally annoying. I should have done dental floss to get it off with the trim. It took eons with goo gone/wd40/etc. So i bought that wheel and it did all of jack for me. I bought plastic razor blades on amazon.. Best creation ever, no paint damage at all.

Side question.. Anyone know how much shops charge to fill the holes on the 86?