Editing Z31/electricz31steering php (section)

=== Mounting & Welding the Motor ===

With the stub we prepared earlier inserted into the motor input shaft and universal joint (to aid alignment of the motor to the universal joint), I tacked the motor tube to the column bracket and did another test fit. Make sure everything still fits before fully welding. Weld the tube to the column bracket as straight as possible. I also clearanced the bracket to allow the top two bolts to be inserted from the other side. Drill the threads out of the top two motor mounting holes to use nuts and bolts.

https://dev.z31library.com/xenonzcar_archive/z31/electric_columnZ/electric%20column%20Z/13.png

https://dev.z31library.com/xenonzcar_archive/z31/electric_columnZ/electric%20column%20Z/14.png

Now, bolt the motor to the column and manipulate it as needed.