Editing Z31/autotomanualswap php (section)

=== Before you start ===

If you are using a parts car Flywheel, You should Have a shop resurface the flywheel if needed.

You will also want to Verify all needed parts and supplies before you get started. Either way you will likely need to get other items that you either forgot to get or lost/broke while doing the swap.

You should also Clean the 5-spd unit as best as you can.

* Drain all oil out of the transmission.
* Replace the rear transmission oil seal.
* Replace the throw-out bearing.
* Apply grease to the clutch fork.
* Inspect the rubber boot; replace if worn or damaged.
* Check neutral and reverse light switch wires for damage; replace switches if wires are frayed.
* Inspect the transmission mount and cross member. If the rubber is cracked or worn, replace both.