Editing Z31/vacuum lines php (section)

==== Clamps & Fitment ====

-
The
'''stock hose clamps'''on the 6mm lines will not fit tightly on the new 6mm hoses. You can either modify or replace the clamps. - While some may run without clamps, it is highly recommended to use them on coolant lines.
-
On the
'''vacuum tank''', some connectors have guards around the nipple. The new 3mm silicone line will not fit because of its wall thickness. Options:- Carefully trim the inner width with an
''Exacto knife'' - Or, use a short piece of old hose with a barrel connector to bridge to the new line

* Carefully trim the inner width with an