Editing S130/cassettedeck php (section)

=== CASSETTE BELT REPLACEMENT ===

Now that the cassette deck is out of the stereo console, it’s time to open it up and replace those worn-out belts.

* Remove the screws securing the top cover of the cassette deck. These can be tight — use care to avoid stripping them.
* Remove the faceplate (three screws).
* Flip the deck over and remove the bottom plate to access the belt area.
* Locate the two large wheels and the small metal plate above them. Remove the two screws holding the plate to gain full access to the belts.

* Inspect the belts. Common issues include broken belts, stretched belts, or belts that have turned to mush. Order replacements — there are five belts in total.
Recommended source:
[http://www.studiosoundelectronics.com Studio Sound Electronics]Use square belts in the following sizes:- RED — 4.0" × 1.2mm (SBS4.0)
* GREEN — 12.4" × 1.2mm (SBS12.4)
* BLUE — 6.0" × 1mm (SBO6.0)
* PURPLE — 4.6" × 1.2mm (SBS4.6)
* YELLOW — 3.2" × 1mm (SBO3.2)

Here’s the belt diagram (faded belt sections indicate hidden routing points):

![Cassette deck belt diagram](images/Cassettedeck/6860040f.png)

The green belt may feel slightly loose, but it still works fine. These belts cost around $1 each and typically arrive quickly.

Once all belts are replaced, simply reassemble the cassette deck by reversing the disassembly steps.